中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
NB/T 47019.6-2011 锅炉、热交换器用管订货技术条件 第6部分:铁素体/奥氏体型双相不锈钢(中英文版) Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 6: Ferrite/austenite duplex steel |
|||
NB/T 47019.2-2011 锅炉、热交换器用管订货技术条件 第2部分:规定室温性能的非合金钢和合金钢(中英文版) Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 2: Non-alloy and alloy steel with room temperature properties |
|||
NB/T 47019.3-2011 锅炉、热交换器用管订货技术条件 第3部分:规定高温性能的非合金钢和合金钢(中英文版) Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 3: Non-alloy and alloy steel with specified elevated temperature properties |
|||
NB/T 47019.4-2011 锅炉、热交换器用管订货技术条件 第4部分:低温用低合金钢(中英文版) Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 4: Low alloy steel for low-temperature service |
|||
NB/T 47019.7-2011 锅炉、热交换器用管订货技术条件 第7部分:有色金属 铜和铜合金(中英文版) Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 7: Copper and copper alloy/tube |
|||
NB/T 47019.8-2011 锅炉、热交换器用管订货技术条件 第8部分:有色金属 钛和钛合金(中英文版) Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 8: Titanium and titanium/alloy |
|||
GB/T 2992.1-2011 耐火砖形状尺寸 第1部分:通用砖(中英文版) Dimensions of refractory bricks - Part 1: Specification for general bricks |
|||
GB/T 26595-2011 无损检测仪器 周向X射线管技术条件(中英文版) Non-destructive testing instruments - Specification for panoramic X-ray tube |
|||
JJF 1290-2011 微粒检测仪校准规范(中英文版) Calibration specification for Particulate Analyzer |
|||
YD/T 2301.1-2011 面向中小企业的信息通信融合服务 第1部分:业务需求(中英文版) Information and communications convergence services specification in SMEs. Part 1: Service requirements |
|||
YD/T 1696.4-2011 机顶盒与iptv业务平台接口技术要求 第4部分:流媒体接口(中英文版) Interface Specification for STB and IPTV Service Platform. Part4:Streaming Interface |
|||
QC/T 845-2011 乘用车座椅用锁技术条件(中英文版) Passenger car. Technique specification of lock for seat |
|||
QC/T 844-2011 乘用车座椅用调角器技术条件(中英文版) Technical specification of recliner for passenger car seats |
|||
QC/T 585-2011 乘用车机械式千斤顶技术条件(中英文版) Technical specification of mechanical jacks for passenger cars |
|||
QC/T 29063.1-2011 汽车机械式变速器总成技术条件 第1部分:微型(中英文版) Technical specification for auto manual transmission assembly. Part 1: Mini-vehicle |
|||
HG/T 20589-2011 化学工业炉受压元件强度计算规定(中英文版) Specification of strength calculation on pressure parts for chemical industrial furnace |
|||
YD/T 2301.2-2011 面向中小企业的信息通信融合服务 第2部分:总体技术要求(中英文版) Information and communication convergence services specification in SMEs. Part 2: Technical requirement |
|||
YD/T 2288.2-2011 小型化可热插拔模块(sfp)用光组件技术条件 第2部分:同轴连接型光接收组件(rosa)(中英文版) Technical specification of optical sub-assembly for small form factor pluggable transceiver module (SFP). Part 2: Coaxial receiver optical sub-assembly (ROSA) |
|||
YD/T 2203-2011 800mhz/2ghz cdma2000数字蜂窝移动通信网 高速分组数据(hrpd)(第三阶段)设备测试方法 接入网(an)(中英文版) Test specification for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network-high rate packet data(Phase 3) equipment access network (AN) |
|||
YD/T 2191.5-2011 电信设备安装的电磁兼容及缓和措施 第5部分:高空电磁脉冲(hemp)抗扰度-高空电磁脉冲射频场感应的传导干扰保护装置技术要求(中英文版) Electromagnetic compatibility for installation and Mitigation guidelines. Part 5: Immunity to HEMP-specification of protective devices for HEMP conducted disturbance |
找到:2661條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [68] [69] [70] [71] [72] [73] [74] |